Air Conditioner WiFi Pairing Guide

Make sure the following settings are enabled before proceeding to Step 1.

- Ensure the mobile phone is connected to 2.4 GHz Wi-Fi

- Ensure Bluetooth is enabled on the mobile phone 

1. 1. 1. 1. 1. 1. Open the "PRISM+ Connect app"
               2. Click "+" icon on the top right and select "Aircon" and select "PRISM+ Luna"
               3. Open up the cover of the indoor unit and locate the Wi-Fi module. 
               4. Press the button with a pen or a slightly sharp object and hold for at least 5 seconds until "CF" is shown on the LED screen.
               5. Press and hold the black button again for at least 5 seconds until the LED screen shows "AP" 
               6. Select your Wi-Fi network 2.4 GHz, input your Wi-Fi network passwords, and press continue. 
               7. Select your unique Device Wi-Fi which looks like "SL-PRISMPLUS-####" by clicking the Open Wi-Fi Setting. 
               8. Please return to PRISM+ Connect Apps after "SL-PRISMPLUS-####" is connected.
               9. Please wait for a 2 minutes while the Aircon is connecting, do not exit the application. 
               10. Once pairing is successful, you will be prompted to enter a name for your aircon.
                   Tip: Give your aircon a name that is unique and easily pronounced for ease of use later.
               11. If this is your first time pairing your aircon, you will be prompted to create a new "Location" where this paired aircon is installed at.
                   (eg. Kitchen. If you have already set up locations prior you can select the location the aircon is installed at and you can now control the Aircon device using the PRISM+ Connect App!)